Kubuntu 9.04 kullanıyorum.Laptopum LG E500.Batarya durumunu sürekli boş gösteriyor.Ayrıca sistemi kapattığımda System halted yazıyor ve otomatik olarak power off olmuyor.

dmesg boot ve log-off loglarını buraya eklemeniz gerekli araştırdığım kadarıyla ne kubuntu ne ubuntu için lg e500 için bu tür bir bug belirtilmemiş, ancak nvidia ekran kartınız varsa suspend-unsuspend sırasında problem yaşayabilirsiniz.

Evet bahsettiğiniz gibi ekran kartım Nvidia ubuntu 8.10 da aynı problemi yaşadım.Kubuntu 9.04 te de bu problemi yaşıyorum . Anlaşıldığı üzere de yeni bir linux kullanıcısıyım :) Gerçekten çok alıştım ama ah işte şu dertleri olmasa.

kubuntu kullanmadığım için direkt yönlendirme yapamıyorum ancak nvidia için donanım sürücülerinin yüklü olması gerekiyor hoş siz sistemi kurdukdan sonra bununla ilgili sizi uyarır ve sürücülerü hemen yükler ki ekrana görüntü geliyor olması ve efektlerde sorundan bahsetmiyor olmanız sorun olmadığına işaret. Dediğim gibi pil göstergesi ve açılış kapanışda sorun olması gibi buglardan bahsedilmemiş sadece suspend buglarından bahsedilmiş ancak oda sınırlı kullanıcı şikayetiyle kapatılmış.

terminal kullanmayı biliyorsanız açılışdan sonra terminal penceresi açıp dmesg >> dmesglog.txt yazın Dosya yönetcinizi açın home klasörünüzü kontrol edin bu dosyayı bulduğunuzda içerisindekileri buraya yazın.

Sanırım biraz uzun oldu ama :)

[    0.000000] BIOS EBDA/lowmem at: 0009fc00/0009fc00
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic)
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007ffc0000 (usable)
[    0.000000]  BIOS-e820: 000000007ffc0000 - 000000007ffce000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007ffce000 - 0000000080000000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around.
[    0.000000] last_pfn = 0x7ffc0 max_arch_pfn = 0x100000
[    0.000000] Scanning 0 areas for low memory corruption
[    0.000000] modified physical RAM map:
[    0.000000]  modified: 0000000000000000 - 0000000000010000 (reserved)
[    0.000000]  modified: 0000000000010000 - 000000000009fc00 (usable)
[    0.000000]  modified: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  modified: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  modified: 0000000000100000 - 000000007ffc0000 (usable)
[    0.000000]  modified: 000000007ffc0000 - 000000007ffce000 (ACPI data)
[    0.000000]  modified: 000000007ffce000 - 0000000080000000 (ACPI NVS)
[    0.000000]  modified: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  modified: 00000000fff80000 - 0000000100000000 (reserved)
[    0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
[    0.000000] RAMDISK: 378c3000 - 37fefc4a
[    0.000000] Allocated new RAMDISK: 00881000 - 00fadc4a
[    0.000000] Move RAMDISK from 00000000378c3000 - 0000000037fefc49 to 00881000 - 00fadc49
[    0.000000] 1163MB HIGHMEM available.
[    0.000000] 883MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 373fe000
[    0.000000]   low ram: 00000000 - 373fe000
[    0.000000]   bootmap 00012000 - 00018e80
[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> [0000001000 - 0000002000]
[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> [0000006000 - 0000007000]
[    0.000000]   #3 [0000100000 - 000087c52c]    TEXT DATA BSS ==> [0000100000 - 000087c52c]
[    0.000000]   #4 [000087d000 - 0000881000]    INIT_PG_TABLE ==> [000087d000 - 0000881000]
[    0.000000]   #5 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000881000 - 0000fadc4a]      NEW RAMDISK ==> [0000881000 - 0000fadc4a]
[    0.000000]   #8 [0000012000 - 0000019000]          BOOTMAP ==> [0000012000 - 0000019000]
[    0.000000] found SMP MP-table at [c00ff780] 000ff780
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   Normal   0x00001000 -> 0x000373fe
[    0.000000]   HighMem  0x000373fe -> 0x0007ffc0
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[2] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x0007ffc0
[    0.000000] On node 0 totalpages: 524111
[    0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3951 pages, LIFO batch:0
[    0.000000]   Normal zone: 1736 pages used for memmap
[    0.000000]   Normal zone: 220470 pages, LIFO batch:31
[    0.000000]   HighMem zone: 2328 pages used for memmap
[    0.000000]   HighMem zone: 295594 pages, LIFO batch:31
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] MPTABLE: OEM ID: TEMPLATE
[    0.000000] MPTABLE: Product ID: ETEMPLATE   
[    0.000000] MPTABLE: APIC at: 0xFEE00000
[    0.000000] Processor #0 (Bootup-CPU)
[    0.000000] Processor #1
[    0.000000] I/O APIC #2 Version 20 at 0xFEC00000.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Processors: 2
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ee00000)
[    0.000000] PERCPU: Allocating 45056 bytes of per cpu data
[    0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520015
[    0.000000] Kernel command line: root=UUID=7446559c-ccec-4522-b6be-6da00f9732b7 ro acpi=off noapic quiet splash 
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 1843.292 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.004000] allocated 10484160 bytes of page_cgroup
[    0.004000] please try cgroup_disable=memory option if you don't want
[    0.004000] Scanning for low memory corruption every 60 seconds
[    0.004000] Memory: 2052948k/2096896k available (4126k kernel code, 42604k reserved, 2208k data, 532k init, 1191688k highmem)
[    0.004000] virtual kernel memory layout:
[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB)
[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB)
[    0.004000]     vmalloc : 0xf7bfe000 - 0xff3fe000   ( 120 MB)
[    0.004000]     lowmem  : 0xc0000000 - 0xf73fe000   ( 883 MB)
[    0.004000]       .init : 0xc0737000 - 0xc07bc000   ( 532 kB)
[    0.004000]       .data : 0xc0507a6f - 0xc072fe60   (2208 kB)
[    0.004000]       .text : 0xc0100000 - 0xc0507a6f   (4126 kB)
[    0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004019] Calibrating delay loop (skipped), value calculated using timer frequency.. 3686.58 BogoMIPS (lpj=7373168)
[    0.004042] Security Framework initialized
[    0.004056] SELinux:  Disabled at boot.
[    0.004084] AppArmor: AppArmor initialized
[    0.004094] Mount-cache hash table entries: 512
[    0.004296] Initializing cgroup subsys ns
[    0.004303] Initializing cgroup subsys cpuacct
[    0.004306] Initializing cgroup subsys memory
[    0.004311] Initializing cgroup subsys freezer
[    0.004331] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004334] CPU: L2 cache: 2048K
[    0.004338] CPU: Physical Processor ID: 0
[    0.004340] CPU: Processor Core ID: 0
[    0.004344] using mwait in idle threads.
[    0.004358] Checking 'hlt' instruction... OK.
[    0.023320] CPU0: Intel(R) Core(TM)2 Duo CPU     T5550  @ 1.83GHz stepping 0d
[    0.128586] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 3686.71 BogoMIPS (lpj=7373425)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 2048K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.216508] CPU1: Intel(R) Core(TM)2 Duo CPU     T5550  @ 1.83GHz stepping 0d
[    0.216526] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.220053] Brought up 2 CPUs
[    0.220057] Total of 2 processors activated (7373.29 BogoMIPS).
[    0.220081] CPU0 attaching sched-domain:
[    0.220084]  domain 0: span 0-1 level MC
[    0.220087]   groups: 0 1
[    0.220094] CPU1 attaching sched-domain:
[    0.220096]  domain 0: span 0-1 level MC
[    0.220098]   groups: 1 0
[    0.220186] net_namespace: 776 bytes
[    0.220199] Booting paravirtualized kernel on bare hardware
[    0.220377] Time:  0:34:55  Date: 06/22/09
[    0.220377] regulator: core version 0.5
[    0.220377] NET: Registered protocol family 16
[    0.220377] EISA bus registered
[    0.221508] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[    0.221511] PCI: Using configuration type 1 for base access
[    0.222461] ACPI: Interpreter disabled.
[    0.222461] SCSI subsystem initialized
[    0.222461] libata version 3.00 loaded.
[    0.222461] usbcore: registered new interface driver usbfs
[    0.222461] usbcore: registered new interface driver hub
[    0.224016] usbcore: registered new device driver usb
[    0.224053] PCI: Probing PCI hardware
[    0.224053] PCI: Probing PCI hardware (bus 00)
[    0.224151] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.224156] pci 0000:00:01.0: PME# disabled
[    0.224274] pci 0000:00:02.5: reg 20 io port: [0xfff0-0xffff]
[    0.224296] pci 0000:00:02.5: PME# supported from D3cold
[    0.224301] pci 0000:00:02.5: PME# disabled
[    0.224327] pci 0000:00:03.0: reg 10 32bit mmio: [0xfe0ff000-0xfe0fffff]
[    0.224381] pci 0000:00:03.1: reg 10 32bit mmio: [0xfe0fe000-0xfe0fefff]
[    0.224447] pci 0000:00:03.3: reg 10 32bit mmio: [0xfe0fd000-0xfe0fdfff]
[    0.224487] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
[    0.224492] pci 0000:00:03.3: PME# disabled
[    0.224534] pci 0000:00:05.0: reg 10 io port: [0xbc00-0xbc07]
[    0.224541] pci 0000:00:05.0: reg 14 io port: [0xb800-0xb803]
[    0.224548] pci 0000:00:05.0: reg 18 io port: [0xb400-0xb407]
[    0.224555] pci 0000:00:05.0: reg 1c io port: [0xb000-0xb003]
[    0.224563] pci 0000:00:05.0: reg 20 io port: [0xac00-0xac0f]
[    0.224570] pci 0000:00:05.0: reg 24 io port: [0xa800-0xa87f]
[    0.224586] pci 0000:00:05.0: PME# supported from D3cold
[    0.224591] pci 0000:00:05.0: PME# disabled
[    0.224651] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    0.224655] pci 0000:00:06.0: PME# disabled
[    0.224723] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.224728] pci 0000:00:07.0: PME# disabled
[    0.224773] pci 0000:00:09.0: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.224784] pci 0000:00:09.0: supports D1 D2
[    0.224786] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.224791] pci 0000:00:09.0: PME# disabled
[    0.224831] pci 0000:00:09.2: reg 10 32bit mmio: [0x000000-0x0000ff]
[    0.224873] pci 0000:00:09.2: supports D1 D2
[    0.224875] pci 0000:00:09.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.224880] pci 0000:00:09.2: PME# disabled
[    0.224917] pci 0000:00:09.3: reg 10 32bit mmio: [0x000000-0x000fff]
[    0.224959] pci 0000:00:09.3: supports D1 D2
[    0.224961] pci 0000:00:09.3: PME# supported from D0 D1 D2 D3hot D3cold
[    0.224966] pci 0000:00:09.3: PME# disabled
[    0.225000] pci 0000:00:09.4: reg 10 32bit mmio: [0xfe0fc000-0xfe0fcfff]
[    0.225008] pci 0000:00:09.4: reg 14 32bit mmio: [0xfe0fb800-0xfe0fbfff]
[    0.225042] pci 0000:00:09.4: supports D1 D2
[    0.225044] pci 0000:00:09.4: PME# supported from D0 D1 D2 D3hot
[    0.225049] pci 0000:00:09.4: PME# disabled
[    0.225095] pci 0000:00:0f.0: reg 10 32bit mmio: [0xfe0f4000-0xfe0f7fff]
[    0.225135] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
[    0.225140] pci 0000:00:0f.0: PME# disabled
[    0.225203] pci 0000:01:00.0: reg 10 32bit mmio: [0xd0000000-0xdfffffff]
[    0.225211] pci 0000:01:00.0: reg 14 io port: [0xc800-0xc8ff]
[    0.225219] pci 0000:01:00.0: reg 18 32bit mmio: [0xfe1f0000-0xfe1fffff]
[    0.225243] pci 0000:01:00.0: reg 30 32bit mmio: [0xfe1c0000-0xfe1dffff]
[    0.225254] pci 0000:01:00.0: supports D1 D2
[    0.225306] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
[    0.225311] pci 0000:00:01.0: bridge 32bit mmio: [0xfe100000-0xfe1fffff]
[    0.225318] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.225385] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe2f0000-0xfe2fffff]
[    0.225514] pci 0000:00:06.0: bridge 32bit mmio: [0xfe200000-0xfe2fffff]
[    0.225592] pci 0000:03:00.0: reg 10 io port: [0xdc00-0xdcff]
[    0.225622] pci 0000:03:00.0: reg 18 64bit mmio: [0xfe3ff000-0xfe3fffff]
[    0.225652] pci 0000:03:00.0: reg 30 32bit mmio: [0xfe3c0000-0xfe3dffff]
[    0.225668] pci 0000:03:00.0: supports D1 D2
[    0.225670] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.225676] pci 0000:03:00.0: PME# disabled
[    0.225739] pci 0000:00:07.0: bridge io port: [0xd000-0xdfff]
[    0.225743] pci 0000:00:07.0: bridge 32bit mmio: [0xfe300000-0xfe3fffff]
[    0.226207] pci 0000:00:02.0: default IRQ router [1039:0968]
[    0.232010] Bluetooth: Core ver 2.13
[    0.232023] NET: Registered protocol family 31
[    0.232023] Bluetooth: HCI device and connection manager initialized
[    0.232023] Bluetooth: HCI socket layer initialized
[    0.232023] NET: Registered protocol family 8
[    0.232023] NET: Registered protocol family 20
[    0.232035] NetLabel: Initializing
[    0.232037] NetLabel:  domain hash size = 128
[    0.232038] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.232053] NetLabel:  unlabeled traffic allowed by default
[    0.232124] AppArmor: AppArmor Filesystem Enabled
[    0.232126] pnp: PnP ACPI: disabled
[    0.232131] PnPBIOS: Scanning system for PnP BIOS support...
[    0.232135] PnPBIOS: Found PnP BIOS installation structure at 0xc00f5fb0
[    0.232138] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x703a, dseg 0xf0000
[    0.232495] PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
[    0.232505] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[    0.232508] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[    0.232511] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[    0.232514] system 00:00: iomem range 0x100000-0x7ffbffff could not be reserved
[    0.232517] system 00:00: iomem range 0x7ffc0000-0x7ffcdfff could not be reserved
[    0.232520] system 00:00: iomem range 0x7ffce000-0x7fffffff could not be reserved
[    0.232523] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.232525] system 00:00: iomem range 0xfff80000-0xffffffff has been reserved
[    0.232533] system 00:06: ioport range 0x800-0x87f has been reserved
[    0.232536] system 00:06: ioport range 0x880-0x8cf has been reserved
[    0.232539] system 00:06: ioport range 0xc00-0xc2f has been reserved
[    0.232541] system 00:06: ioport range 0x480-0x48f has been reserved
[    0.232544] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
[    0.232547] system 00:06: ioport range 0xcf8-0xcff could not be reserved
[    0.232556] system 00:09: iomem range 0xe0000000-0xefffffff has been reserved
[    0.232780] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[    0.232784] pci 0000:00:01.0:   IO window: 0xc000-0xcfff
[    0.232790] pci 0000:00:01.0:   MEM window: 0xfe100000-0xfe1fffff
[    0.232795] pci 0000:00:01.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.232802] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[    0.232804] pci 0000:00:06.0:   IO window: disabled
[    0.232810] pci 0000:00:06.0:   MEM window: 0xfe200000-0xfe2fffff
[    0.232814] pci 0000:00:06.0:   PREFETCH window: disabled
[    0.232821] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[    0.232825] pci 0000:00:07.0:   IO window: 0xd000-0xdfff
[    0.232831] pci 0000:00:07.0:   MEM window: 0xfe300000-0xfe3fffff
[    0.232835] pci 0000:00:07.0:   PREFETCH window: disabled
[    0.232842] pci 0000:00:09.0: CardBus bridge, secondary bus 0000:04
[    0.232845] pci 0000:00:09.0:   IO window: 0x001000-0x0010ff
[    0.232849] pci 0000:00:09.0:   IO window: 0x001400-0x0014ff
[    0.232854] pci 0000:00:09.0:   PREFETCH window: 0x88000000-0x8bffffff
[    0.232859] pci 0000:00:09.0:   MEM window: 0x8c000000-0x8fffffff
[    0.232874] pci 0000:00:01.0: setting latency timer to 64
[    0.232885] pci 0000:00:06.0: setting latency timer to 64
[    0.232896] pci 0000:00:07.0: setting latency timer to 64
[    0.232904] pci 0000:00:09.0: enabling device (0140 -> 0143)
[    0.232911] pci 0000:00:09.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.232918] bus: 00 index 0 io port: [0x00-0xffff]
[    0.232920] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[    0.232922] bus: 01 index 0 io port: [0xc000-0xcfff]
[    0.232924] bus: 01 index 1 mmio: [0xfe100000-0xfe1fffff]
[    0.232927] bus: 01 index 2 mmio: [0xd0000000-0xdfffffff]
[    0.232929] bus: 01 index 3 mmio: [0x0-0x0]
[    0.232931] bus: 02 index 0 mmio: [0x0-0x0]
[    0.232933] bus: 02 index 1 mmio: [0xfe200000-0xfe2fffff]
[    0.232935] bus: 02 index 2 mmio: [0x0-0x0]
[    0.232936] bus: 02 index 3 mmio: [0x0-0x0]
[    0.232938] bus: 03 index 0 io port: [0xd000-0xdfff]
[    0.232940] bus: 03 index 1 mmio: [0xfe300000-0xfe3fffff]
[    0.232942] bus: 03 index 2 mmio: [0x0-0x0]
[    0.232944] bus: 03 index 3 mmio: [0x0-0x0]
[    0.232946] bus: 04 index 0 io port: [0x1000-0x10ff]
[    0.232948] bus: 04 index 1 io port: [0x1400-0x14ff]
[    0.232950] bus: 04 index 2 mmio: [0x88000000-0x8bffffff]
[    0.232952] bus: 04 index 3 mmio: [0x8c000000-0x8fffffff]
[    0.232961] NET: Registered protocol family 2
[    0.248054] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.248307] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.248818] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.249150] TCP: Hash tables configured (established 131072 bind 65536)
[    0.249153] TCP reno registered
[    0.256080] NET: Registered protocol family 1
[    0.256221] checking if image is initramfs... it is
[    0.913246] Freeing initrd memory: 7347k freed
[    0.913541] cpufreq: No nForce2 chipset.
[    0.913725] audit: initializing netlink socket (disabled)
[    0.913768] type=2000 audit(1245630895.912:1): initialized
[    0.921542] highmem bounce pool size: 64 pages
[    0.921549] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.923386] VFS: Disk quotas dquot_6.5.1
[    0.923457] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.924134] fuse init (API version 7.10)
[    0.924225] msgmni has been set to 1698
[    0.924447] alg: No test for stdrng (krng)
[    0.924460] io scheduler noop registered
[    0.924462] io scheduler anticipatory registered
[    0.924464] io scheduler deadline registered
[    0.924478] io scheduler cfq registered (default)
[    0.984622] pci 0000:01:00.0: Boot video device
[    0.984710] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    0.984748] pcieport-driver 0000:00:01.0: found MSI capability
[    0.984785] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[    0.984799] pci_express 0000:00:01.0:pcie00: allocate port service
[    0.984872] pcieport-driver 0000:00:06.0: setting latency timer to 64
[    0.984926] pcieport-driver 0000:00:06.0: found MSI capability
[    0.984956] pcieport-driver 0000:00:06.0: irq 2302 for MSI/MSI-X
[    0.984970] pci_express 0000:00:06.0:pcie00: allocate port service
[    0.985046] pcieport-driver 0000:00:07.0: setting latency timer to 64
[    0.985100] pcieport-driver 0000:00:07.0: found MSI capability
[    0.985130] pcieport-driver 0000:00:07.0: irq 2301 for MSI/MSI-X
[    0.985144] pci_express 0000:00:07.0:pcie00: allocate port service
[    0.985235] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.985245] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.985328] isapnp: Scanning for PnP cards...
[    1.338824] isapnp: No Plug & Play device found
[    1.339895] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.341023] brd: module loaded
[    1.341358] loop: module loaded
[    1.341424] Fixed MDIO Bus: probed
[    1.341431] PPP generic driver version 2.4.2
[    1.341494] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    1.341526] Driver 'sd' needs updating - please use bus_type methods
[    1.341535] Driver 'sr' needs updating - please use bus_type methods
[    1.341699] sata_sis 0000:00:05.0: version 1.0
[    1.341718] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
[    1.341810] scsi0 : sata_sis
[    1.341889] scsi1 : sata_sis
[    1.341924] ata1: PATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xac00 irq 3
[    1.341927] ata2: PATA max UDMA/133 cmd 0xb400 ctl 0xb000 bmdma 0xac08 irq 3
[    1.504459] ata1.00: ATA-8: Hitachi HTS542512K9A300, BB2OC3EP, max UDMA/133
[    1.504462] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    1.520471] ata1.00: configured for UDMA/133
[    1.686894] scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54251 BB2O PQ: 0 ANSI: 5
[    1.686994] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    1.687011] sd 0:0:0:0: [sda] Write Protect is off
[    1.687013] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.687040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.687105] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors: (120 GB/111 GiB)
[    1.687120] sd 0:0:0:0: [sda] Write Protect is off
[    1.687122] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.687147] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.687151]  sda: sda1 sda2 sda3 < sda5 sda6 >
[    1.744576] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.744620] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.745098] pata_sis 0000:00:02.5: version 0.5.2
[    1.745198] scsi2 : pata_sis
[    1.745267] scsi3 : pata_sis
[    1.745303] ata3: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfff0 irq 14
[    1.745305] ata4: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfff8 irq 15
[    1.908847] ata3.01: ATAPI: HL-DT-ST DVDRAM GSA-T20N, WA03, max UDMA/33
[    1.924868] ata3.01: configured for UDMA/33
[    1.927129] ata4: port disabled. ignoring.
[    1.930166] scsi 2:0:1:0: CD-ROM            HL-DT-ST DVDRAM GSA-T20N  WA03 PQ: 0 ANSI: 5
[    1.940976] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.940979] Uniform CD-ROM driver Revision: 3.20
[    1.941074] sr 2:0:1:0: Attached scsi CD-ROM sr0
[    1.941111] sr 2:0:1:0: Attached scsi generic sg1 type 5
[    1.941226] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.941259] ehci_hcd 0000:00:03.3: EHCI Host Controller
[    1.941319] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
[    1.941354] ehci_hcd 0000:00:03.3: irq 15, io mem 0xfe0fd000
[    1.952047] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
[    1.952132] usb usb1: configuration #1 chosen from 1 choice
[    1.952165] hub 1-0:1.0: USB hub found
[    1.952173] hub 1-0:1.0: 8 ports detected
[    1.952289] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.952310] ohci_hcd 0000:00:03.0: OHCI Host Controller
[    1.952355] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
[    1.952368] ohci_hcd 0000:00:03.0: irq 11, io mem 0xfe0ff000
[    2.010089] usb usb2: configuration #1 chosen from 1 choice
[    2.010115] hub 2-0:1.0: USB hub found
[    2.010123] hub 2-0:1.0: 4 ports detected
[    2.010222] ohci_hcd 0000:00:03.1: OHCI Host Controller
[    2.010264] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
[    2.010275] ohci_hcd 0000:00:03.1: irq 5, io mem 0xfe0fe000
[    2.066090] usb usb3: configuration #1 chosen from 1 choice
[    2.066115] hub 3-0:1.0: USB hub found
[    2.066124] hub 3-0:1.0: 4 ports detected
[    2.066215] uhci_hcd: USB Universal Host Controller Interface driver
[    2.066265] usbcore: registered new interface driver libusual
[    2.066295] usbcore: registered new interface driver usbserial
[    2.066307] USB Serial support registered for generic
[    2.066325] usbcore: registered new interface driver usbserial_generic
[    2.066327] usbserial: USB Serial Driver core
[    2.066380] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[    2.066938] i8042.c: Detected active multiplexing controller, rev 1.1.
[    2.067136] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.067142] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.067145] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.067147] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.067150] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.068084] mice: PS/2 mouse device common for all mice
[    2.072134] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[    2.072151] rtc0: alarms up to one day, 114 bytes nvram
[    2.072208] device-mapper: uevent: version 1.0.3
[    2.072294] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    2.072367] device-mapper: multipath: version 1.0.5 loaded
[    2.072370] device-mapper: multipath round-robin: version 1.0.0 loaded
[    2.072446] EISA: Probing bus 0 at eisa.0
[    2.072454] Cannot allocate resource for EISA slot 1
[    2.072481] EISA: Detected 0 cards.
[    2.072532] cpuidle: using governor ladder
[    2.072534] cpuidle: using governor menu
[    2.073090] TCP cubic registered
[    2.073193] NET: Registered protocol family 10
[    2.073651] lo: Disabled Privacy Extensions
[    2.074009] NET: Registered protocol family 17
[    2.074027] Bluetooth: L2CAP ver 2.11
[    2.074029] Bluetooth: L2CAP socket layer initialized
[    2.074032] Bluetooth: SCO (Voice Link) ver 0.6
[    2.074034] Bluetooth: SCO socket layer initialized
[    2.074063] Bluetooth: RFCOMM socket layer initialized
[    2.074070] Bluetooth: RFCOMM TTY layer initialized
[    2.074072] Bluetooth: RFCOMM ver 1.10
[    2.074115] Using IPI No-Shortcut mode
[    2.074187] registered taskstats version 1
[    2.074305]   Magic number: 13:677:557
[    2.074365] rtc_cmos 00:08: setting system clock to 2009-06-22 00:34:57 UTC (1245630897)
[    2.074368] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    2.074370] EDD information not available.
[    2.074701] Freeing unused kernel memory: 532k freed
[    2.074834] Write protecting the kernel text: 4128k
[    2.074881] Write protecting the kernel read-only data: 1532k
[    2.075157] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    2.264647] usb 1-5: new high speed USB device using ehci_hcd and address 2
[    2.280881] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.280928] r8169 0000:03:00.0: setting latency timer to 64
[    2.281066] r8169 0000:03:00.0: irq 2300 for MSI/MSI-X
[    2.281758] eth0: RTL8101e at 0xf7c30000, 00:1d:92:55:36:bc, XID 34200000 IRQ 2300
[    2.303277] ohci1394 0000:00:09.4: enabling device (0000 -> 0002)
[    2.303288] ohci1394 0000:00:09.4: can't find IRQ for PCI INT A; please try using pci=biosirq
[    2.303295] ohci1394 0000:00:09.4: setting latency timer to 64
[    2.353043] ohci1394: Failed to allocate interrupt 0
[    2.354436] ohci1394: probe of 0000:00:09.4 failed with error -12
[    2.398369] usb 1-5: configuration #1 chosen from 1 choice
[    2.675071] PM: Starting manual resume from disk
[    2.675075] PM: Resume from partition 8:6
[    2.675077] PM: Checking hibernation image.
[    2.675258] PM: Resume from disk failed.
[    2.682293] ReiserFS: sda5: found reiserfs format "3.6" with standard journal
[    2.682306] ReiserFS: sda5: using ordered data mode
[    2.710248] ReiserFS: sda5: journal params: device sda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[    2.710573] ReiserFS: sda5: checking transaction log (sda5)
[    2.812076] usb 2-4: new full speed USB device using ohci_hcd and address 2
[    3.112174] usb 2-4: configuration #1 chosen from 1 choice
[    4.198545] ReiserFS: sda5: replayed 44 transactions in 1 seconds
[    4.211642] ReiserFS: sda5: Using r5 hash to sort names
[   10.394850] udev: starting version 141
[   11.320707] yenta_cardbus 0000:00:09.0: CardBus bridge found [1462:63f1]
[   11.320732] yenta_cardbus 0000:00:09.0: O2: res at 0x94/0xD4: 00/ea
[   11.320734] yenta_cardbus 0000:00:09.0: O2: enabling read prefetch/write burst
[   11.320740] yenta_cardbus 0000:00:09.0: no PCI IRQ, CardBus support disabled for this socket.
[   11.320742] yenta_cardbus 0000:00:09.0: check your BIOS CardBus, BIOS IRQ or ACPI settings.
[   11.344326] cfg80211: Calling CRDA to update world regulatory domain
[   11.394262] cfg80211: World regulatory domain updated:
[   11.394266]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.394269]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.394271]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.394274]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.394276]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.394279]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.442704] Linux agpgart interface v0.103
[   11.449510] yenta_cardbus 0000:00:09.0: ISA IRQ mask 0x0200, PCI irq 0
[   11.449514] yenta_cardbus 0000:00:09.0: Socket status: 30000006
[   11.534942] Linux video capture interface: v2.00
[   11.557318] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   11.658262] Bluetooth: Generic Bluetooth USB driver ver 0.3
[   11.658380] usbcore: registered new interface driver btusb
[   11.675526] sdhci: Secure Digital Host Controller Interface driver
[   11.675529] sdhci: Copyright(c) Pierre Ossman
[   11.689943] sdhci-pci 0000:00:09.2: SDHCI controller found [1217:7120] (rev 2)
[   11.689957] sdhci-pci 0000:00:09.2: enabling device (0000 -> 0002)
[   11.689966] sdhci-pci 0000:00:09.2: can't find IRQ for PCI INT A; please try using pci=biosirq
[   11.690025] mmc0: Unknown controller version (2). You may experience problems.
[   11.690036] sdhci-pci 0000:00:09.2: setting latency timer to 64
[   11.690052] sdhci-pci: probe of 0000:00:09.2 failed with error -16
[   11.704587] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   11.818442] uvcvideo: Found UVC 1.00 device <unnamed> (0c45:62c0)
[   11.818991] input: UVC Camera (0c45:62c0) as /devices/pci0000:00/0000:00:03.3/usb1/1-5/1-5:1.0/input/input3
[   11.820380] usbcore: registered new interface driver uvcvideo
[   11.820405] USB Video Class driver (v0.1.0)
[   11.879205] ath5k_pci 0000:02:00.0: setting latency timer to 64
[   11.879285] ath5k_pci 0000:02:00.0: registered as 'phy0'
[   11.920720] phy0: Selected rate control algorithm 'pid'
[   12.056582] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[   12.096370] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[   12.098058] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[   12.098730] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[   12.098837] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc30-0xc7f
[   12.099348] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[   12.222605] HDA Intel 0000:00:0f.0: setting latency timer to 64
[   12.246197] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   12.520637] lp: driver loaded but no devices found
[   12.568295] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008
[   12.595601] Adding 979924k swap on /dev/sda6.  Priority:-1 extents:1 across:979924k
[   12.599544] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input4
[   19.172960] ReiserFS: sda5: Removing [93017 161428 0x0 SD]..done
[   19.173007] ReiserFS: sda5: Removing [8530 112860 0x0 SD]..done
[   19.173028] ReiserFS: sda5: Removing [8530 33920 0x0 SD]..done
[   19.173046] ReiserFS: sda5: Removing [8530 23308 0x0 SD]..done
[   19.173064] ReiserFS: sda5: Removing [8530 9046 0x0 SD]..done
[   19.173086] ReiserFS: sda5: Removing [26 5026 0x0 SD]..done
[   19.173107] ReiserFS: sda5: Removing [26 5024 0x0 SD]..done
[   19.173126] ReiserFS: sda5: Removing [26 2422 0x0 SD]..done
[   19.173145] ReiserFS: sda5: Removing [26 2372 0x0 SD]..done
[   19.173164] ReiserFS: sda5: Removing [26 1856 0x0 SD]..done
[   19.173181] ReiserFS: sda5: There were 10 uncompleted unlinks/truncates. Completed
[   20.654012] type=1505 audit(1245620116.078:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=1861
[   20.654160] type=1505 audit(1245620116.078:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=1861
[   20.654205] type=1505 audit(1245620116.078:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=1861
[   20.654250] type=1505 audit(1245620116.078:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=1861
[   20.790746] type=1505 audit(1245620116.214:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=1866
[   20.791045] type=1505 audit(1245620116.214:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=1866
[   20.822898] type=1505 audit(1245620116.246:8): operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" pid=1870
[   20.851062] type=1505 audit(1245620116.274:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=1874
[   24.795626] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   24.795629] Bluetooth: BNEP filters: protocol multicast
[   24.846326] Bridge firewalling registered
[   25.763209] ppdev: user-space parallel port driver
[   26.714740] [drm] Initialized drm 1.1.0 20060810
[   26.937533] pci 0000:01:00.0: setting latency timer to 64
[   26.937810] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   27.788787] [drm] Setting GART location based on new memory map
[   27.804882] [drm] Loading RV610 CP Microcode
[   27.805142] [drm] Loading RV610 PFP Microcode
[   27.820071] [drm] Resetting GPU
[   27.820129] [drm] writeback test succeeded in 1 usecs
[   29.577792] r8169: eth0: link down
[   29.578017] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   29.605721] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   31.460339] wlan0: authenticate with AP 00:14:c1:15:52:0f
[   31.657330] wlan0: authenticate with AP 00:14:c1:15:52:0f
[   31.857335] wlan0: authenticate with AP 00:14:c1:15:52:0f
[   32.057345] wlan0: authentication with AP 00:14:c1:15:52:0f timed out
[   51.715819] wlan0: authenticate with AP 00:1d:19:15:92:68
[   51.717040] wlan0: authenticated
[   51.717043] wlan0: associate with AP 00:1d:19:15:92:68
[   51.719998] wlan0: RX AssocResp from 00:1d:19:15:92:68 (capab=0x451 status=0 aid=1)
[   51.720001] wlan0: associated
[   51.720333] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   62.494062] wlan0: no IPv6 routers present

Bu arada code için oluşturulan dive bir heigth versem hiç te fena olmazmış:):) Bunu bug listeme alayım bair hehe :):)

@Mustafa ileri : Daha iyi olmuş :)

Bir irq problemi dışında ciddi bir problem göze çarpmıyor birde problemi kapanışdan dolayı journal bilgilerine göre yapılan dosya sistemi düzeltmeleri var. Dilerseniz biosa girip irq tablosunun nasıl oluşturulduğuna bir bakın birde güç yönetimi ile ilgili standart dışı bir yol izlenmişmi gözlemleyin. Şimdilik söyleyebileceklerim bu kadar.

söylediklerinizi deneyeceğim teşekkür ederim... :)

East Hampton Limousine and Town Car Services Call 1 631 703 1662 http://www.asmlimousine.com Asm limousine and town car services provides transportation services from or to Long Island, Jfk airport,Laguardia Airport,Newark Airport,Islip airport,white Plains airport for years.

[ ISP ] Mac Arthur -- [ JFK ] John F Kennedy Airport -- [ EWR ] Newark Airport -- [ LGA ] LaGuardia Airport

Asm Limousine Town Car service offers discounted yet excellent town car service with great rates! .

We service East Hampton, Water Mill, Bridge Hamptons.

Newark (EWR), John F. Kennedy (JFK), LaGuardia (LGA) Mac Arthur (ISP) Airports, Manhattan, Long Island, Westchester and the greater New York area with a growing fleet of Lincoln town cars. East Hampton limousine and Town car Services can pick you up from just about anywhere in the East Hampton, Bridge Hampton, Water Mill,Amagensett area,Long Island and take you wherever you need to go, (quickly and on time). Great Rates Are Just A Phone Call Away! Click below to visit our website: http://www.asmlimousine.com call 1 631 703 1662 We provide 24 hours a day 7 days a week service. Although we can usually accommodate our customers on short notice; however, we do recommend that you make your reservations at least 24 hours in advance. All cars and drivers are fully licensed and insured by the NYTLC (New York Taxi Limousine Commission). Our knowledgeable operator is always ready to assist you with all of your transportation needs

Bu arada ubuntu 9.10 da bu problem çözülmüş gibi görünüyor.